Rotonivo RN 6004 niveauvagt – Rustfrit stål 1.4305 (303)

Kompakt ekstra forstærket niveauvagt/fyldemelder nem installation i top, midte eller bund. Kvalitetsmelder med forstærkede kuglelejer og kraftig motor/print sikre mange års stabil drift.

Velegnet til

  • Korn / foderstoffer
  • Flis
  • Sand
  • Glas
  • Piller
  • Granulat
  • Pulver
  • … og mange andre faste stoffer
Varenummer (SKU): N/A Kategori: Tag:

Beskrivelse

Rotonivo RN 6004 niveauvagt

Egenskaber for Rotonivo RN 6004 niveauvagt:

  • Kan skræddersys efter behov
  • Meget solid udførsel
  • Ingen vedligeholdelse
  • Nem installation
  • Slidstærkt kugleleje
  •  Ekstra stærk motor

Længde
150 – 300 mm

Temperatur
-40 til 600 ºC (Proces)
Tryk
Op til 10 bar
Output
Relæ SPDT
Spænding
  • 230V AC 50-60 Hz
  • 115V AC 50-60 Hz
  •  48V AC 50-60 Hz
  •  24V AC 50-60 Hz
  •  24V DC
  • 230V AC eller 115V AC eller 24V DC (multispænding)
  • 22 … 230V AC og 24V DC (Universal spænding)
Godkendelser
CE, ATEX, FM/CSA, RTN, GOST
  • pos.11x – Guarantee extension to 5 years
  • pos.15 Flat gasket
  • pos.17 Radial shaft sealing
  • Stainless steel ball bearing
  • pos.21 x Weather protection cover
  • Pos.22 Mounting set for flange mounting
  • pos.24 Hexagon nut
  • pos.25 b – Functional safety SIL 2
  • pos.25 x Fail safe alarm
  • pos.26 x Heating of housing
  • pos.27 Signal lamp
  • pos.28 Cable entry
  • pos.29 y Food grade materials
  • pos.29 EHEDG approval
  • pos.35 Plug

Ved bestilling af optioner – Ring venligst 66149323

Vi lagerfører enkelte typer – spørg venligst
Fra fabrik – ca 2-3 uger afhængig af type

Yderligere information

Certificate

(0) CE/TR-CU, (A) IEC-Ex/ INMETRO – Dust: Zone 20/21 – Protection method: Dust Ignition Proof, (C) IEC-Ex/ INMETRO – Dust: Zone 20/21 – Gas: Zone 1 – Protection method: Flameproof/ Increased Safety/ Dust Ignition Proof, (D) IEC-Ex/ INMETRO – Dust: Zone 20/21 – Gas: Zone 1 – Protection method: Flameproof/ Dust Ignition Proof, (E) TR-CU – Dust: Zone 20/21 – Protection method: Dust Ignition Proof, (K) TR-CU – Dust: Zone 20/21 – Gas: Zone 1 – Protection method: Flameproof/ Increased Safety/ Dust Ignition Proof, (L) TR-CU – Dust: Zone 20/21 – Gas: Zone 1 – Protection method: Flameproof/ Dust Ignition Proof, (M) FM General Purpose, (N) FM/ CSA – Dust: Cl. II, III, Div.1 A 20/21 – Protection method: Dust Ignition Proof, (R) ATEX – Dust: Zone 20/21 – Gas: Zone 1 – Protection method: Flameproof/ Increased Safety/ Dust Ignition Proof, (S) FM/ CSA – Dust: Cl. II, III, Div.1 A 20/21 – Gas: Zone 1 – Protection method: Flameproof/ Increased Safety/ Dust Ignition Proof, (T) ATEX – Dust: Zone 20/21 – Gas: Zone 1 – Protection method: Flameproof/ Dust Ignition Proof, (U) FM/ CSA – Dust: Cl. II, III, Div.1 A 20/21 – Gas: Cl. I Div.1/ Zone 1 – Protection method: Explosion Proof/ Dust Ignition Proof, (W) ATEX – Dust: Zone 20/21 – Protection method: Dust Ignition Proof

Process temperature

(1) Max. +80°C (176°F), (2) Max. +150°C (302°F), (3) Max. +250°C (482°F), (4) Max. +350℃ (662℉), (5) Max. +600°C (1,112°F)(2)

Process overpressure

(1) Max. 0,8 bar (11,6 psi), (2) Max. 5 bar (73 psi)(1), (3) Max. 10 bar (145 psi)

Power supply

(A) 230 V AC 50 – 60 Hz – Motor Speed 1/min, (B) 115 V AC 50 – 60 Hz – Motor Speed 1/min, (C) 48 V AC 50 – 60 Hz – Motor Speed 1/min, (D) 24 V AC 50 – 60 Hz – Motor Speed 1/min, (E) 24 V DC – Motor Speed 1/min, (F) 24 V DC/ 22 .. 230 V AC universal voltage – Motor Speed 1/min, (G) 24 V DC PNP – Motor Speed 1/min, (H) 24 V DC PNP – Motor Speed 5/min, (S) 230 V AC 50 – 60 Hz – Motor Speed 5/min, (T) 115 V AC 50 – 60 Hz – Motor Speed 5/min, (U) 48 V AC 50 – 60 Hz – Motor Speed 5/min, (V) 24 V AC 50 – 60 Hz – Motor Speed 5/min, (W) 24 V DC – Motor Speed 5/min, (X) 24 V DC/ 22 .. 230 V AC universal voltage – Motor Speed 5/min

Process connection 4

(A) thread G1½, DIN 228, (B) thread G 1¼, DIN 228, (F) thread NPT 1½", conical ANSI B1.20.1, (H) flange 150×150, 4x ø18 LK-ø170 (max. 0.8 bar (11.6 psi)) (RN6004), (I) flange 150×150, 4x ø14 LK-ø170, (K) flange DN32 PN6, EN 1092-1, (L) flange DN100 PN6, EN 1092-1, (M) flange DN100 PN16, EN 1092-1 (RN6004), (N) flange DN50 PN16, EN 1092-1 (RN6004), (P) Triclamp 2" (DN50) ISO 2852 (max. 250°C (482°F)) (RN6004), (Q) thread NPT 1¼", conical ANSI B1.20.1 (max. 250°C (482°F)) (RN6004), (S) flange 2" 150lbs ANSI B16.5 (RN6004), (T) flange3" 150 lbs ANSI B16.5, (U) flange 4" 150 lbs ANSI B16.5

Material of process connection

(3) Stainless steel – 1.4305 (303) A-Q/ 1.4301 (304) P-I/ 1.4541 (321) K-U

Length of Extension "L"

(N) 150 mm (5.90"), (P) 200 mm (7.87"), (Q) 250 mm (9,84"), (R) 300 mm (11.8"), (Z) other lengthes

Material of extension "L"

(3) Stainless steel 1.4305 (303)/ 1.4301 (304)

Measuring vane

(A) boot-shaped(1) 40 x 98 mm (1.57 x 3.86"), (B) rectangular 50 x 98 mm (1.97 x 3.86″), (C) rectangular 50 x 150 mm (1.97 x 5.90″), (D) boot-shaped(1) 35 x 106 mm (1.38 x 4.17″) for 11/4″ socket (L=10 mm longer), (E) rectangular 50 x 250 mm (1.97 x 9.84″), (F) rectangular 98 x 98 mm (3.86 x 3.86″), (G) rectangular 98 x 150 mm (3.86 x 5.90″), (I) rectangular 98 x 250 mm (3.86 x 9.84″), (K) hinged vane 98 x 200 mm (3.86 x 7.87″) double sided (L=10 mm), (M) rubber vane 98 x 250 mm (3.86 x 9.84″) (max.80°C (176°F)), (S) hinged vane 98 x 100 mm (3.86 x 3.93″) single sided (L=10 mm longer, (Y) without – including splint pin for fixation